Grain-systems Tanks PNEG-4075G User Manual Page 154
- Page / 170
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Chapter 8: Accessories
Table 8-3 Sidewall Instructions (Two Post Stiffener)
Number of Rings on the Bin Chute Location Horizontal Starting Location
All
Locate 1st chute in 2nd ring from top.
Top bolt holes in chute to be located on 2nd corrugation of body sheet.
11, 12, 15, 17, 19, 21, and 23 Center chute over vertical seam.
10, 12, 14, 16, 18, 20, 22, and 24 Center chute 56-1/4 in. from the 1st horizontal seam bolt in the 2nd ring.
Table 8-4 Sidewall Instructions (Three Post Stiffener)
Number of Rings on the Bin Chute Location Horizontal Starting Location
All
Locate 1st chute in 2nd ring from top.
Top bolt holes in chute to be located on 2nd corrugation of body
sheet.
11, 14, 17, 20, 23, 26, 29, 32, and 35 Center chute 75 in. (left to right) from 1st hole in 2nd body sheet.
10, 13, 16, 19, 22, 25, 28, 31, 34, and 37 Center chute 37-1/2 in. (left to right) from 1st hole in 2nd body sheet.
12, 15, 18, 21, 24, 27, 30, 33, and 36 Center chute over vertical seam.
Installing the Sidedraw Baffle Chute (Two Post Stiffener)
The sidedraw baffle chute helps direct the bin contents to the discharge chute.
1. Determine the sidedraw system location, and ensure the installation of baffle chutes (C) will not inter-
fere with stiffeners (A).
2. Starting at the top of the bin, locate the second ring (B), and measure 56-3/4 in. (D) from the edge of
sidewall sheet (E), for the proper centering placement of the baffle chute.
3. Locate the horizontal seam connecting the first and second ring, and measure approximately 2-21/32
in. (J) from the center hole in the horizontal seam to the first center hole on the baffle chute. Mark or
scribe the hole location.
4. Align the first baffle chute hole with the mark, and ensure the baffle chute is level. Place another mark
or scribe at the opposite hole on the baffle chute (C).
5. Field drill a 7/16 in. hole and install flange bolts (H) and flange nuts (I).
6. Repeat the field drilling process for the remaining six holes.
7. Repeat this procedure for the remaining baffle chutes.
NOTE: A typical installation has equal spacing (K).
154 Pneg-4075G 75 Ft Diameter 40-Series Bin
- 75 Ft Diameter Bin — Gamma 1
- Contents 3
- Table of Contents 4
- 1 Safety Precautions 7
- Cautionary Symbols 9
- Safety Decals 10
- Chapter 1: Safety Precautions 11
- Safety Sign-off Sheet 13
- 2 General Overview 15
- Chapter 2: General Overview 16
- Construction 17
- Sample Gauge Sheet 20
- 3 Hardware Requirements 23
- Bolt Torque Specifications 24
- Identifying Bolt Grades 25
- Bolt Identification 27
- Bolt S-275 27
- Bolt S-10260 27
- Bolt S-277 27
- Bolt S-7485 28
- Bolt S-7487 28
- Bolt S-7486 28
- Bolt S-7488 29
- Bolt S-10252 29
- Bolt S-10261 30
- 4 Assembling Sidewall Sheets 31
- 5 Base Angle Installation 37
- example 38
- Anchor Bolt Detail 39
- 6 Stiffeners 43
- Chapter 6: Stiffeners 44
- Standard Stiffeners 45
- Top Stiffeners 46
- Stiffeners Splice 47
- Base Stiffeners 48
- Base Boots 49
- Two-Ring Stiffener (16 Ga) 50
- Connection 50
- Stiffener (16 Ga) 51
- Two-Ring Stiffener (0–14 Ga) 53
- (2–8 Ga) Connection 53
- Base Stiffener (2–8 Ga) 54
- Stiffener (10–16 Ga) 56
- Base Boot 60
- Stiffener with Insert 61
- 7 Roof Assembly 67
- Assembling a Laminated Rafter 74
- Assembling Purlin Number 6 80
- Assembling Purlin Number 5 81
- Assembling Purlin Number 4 84
- Assembling Purlin Number 3 86
- Assembling Purlin Number 2 88
- Assembling Purlin Number 1 90
- Assembling a Double A-Frame 92
- Assembling the Center Collar 94
- Center Collar Placement 97
- Chapter 7: Roof Assembly 100
- Attaching the Roof Panels 110
- Installing the Roof Flashing 115
- 8 Accessories 127
- Installing Roof Ladder Steps 128
- Chapter 8: Accessories 129
- Roof Ring Placement 130
- Installing a Roof Ring 131
- Assembling the Roof Exhauster 136
- Assembling the Auto Roof Vent 140
- Installing the Manway Cover 144
- Ladder Section Assembly 145
- Inside Ladder Placement 146
- Wind Ring Requirements 164
- Installing Wind Rings 165
- Warranty Extensions: 169
- Conditions and Limitations: 169
- Copyright © 2013 by GSI Group 170
- Printed in the USA 170
- CN #307887 170
Related products and manuals for Equipment Grain-systems Tanks PNEG-4075G
(50 pages)
(54 pages)© 2020, manymanuals.com. All rights reserved. | 0.335 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals