Grain-systems Tanks PNEG-4075G User Manual download pdf (Page 33)

Chapter 4: Assembling Sidewall Sheets

Figure 4-2 Standard and quad punched sidewall sheets as viewed from the outside

Vertical strip of caulk

10 in. (25.4 cm) Horizontal strip of caulk

• Before bolting the next ring into place, apply one 10 in. strip of caulk (C) on the front of the under-

lapped sheet at each joint.

• Also, place a 10 in. (25.4 cm) strip of caulk (D) along the lower horizontal edge of the lapping sheet at

every vertical seam. This will fill the space that occurs between the holes caused by the overlapping

sheets.

Pneg-4075G 75 Ft Diameter 40-Series Bin 33

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 169 170

No comments

Grain-systems Tanks PNEG-4075G User Manual Page 33