Grain-systems Bin Flooring PNEG-222 User Manual download pdf (Page 33)

PNEG-222 48' Cor-Lok and Cut-Lok Flooring 33

12. Flashing Support at Stiffeners

Stiffener Flashing Support Instructions for Internal

Universal Stiffeners

1. Install the floor and support system, cutting the floor to go around the internal stiffeners as required.

2. Break the stiffener flashing support (SS-6984) into its three (3) components.

3. Lay the flashing supports on top of the flooring and weld the flashing supports to the stiffener as close

as possible. Fasten the flashing to the wall, flashing support and floor. Seal all spaces by welding

or caulking.

4. Paint all welds with good quality zinc rich paint.

5. Stiffener flashing supports (SS-6984) must be ordered separately from the standard floor

and flashing.

Figure 12A

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 41 42

No comments

Grain-systems Bin Flooring PNEG-222 User Manual Page 33