Grain-systems Bin Flooring PNEG-222 User Manual download pdf (Page 10)

2. Recommended Method for Full Floor Installation

10 PNEG-222 48' Cor-Lok and Cut-Lok Flooring

6. Some floor planks will need to be spliced together. (See Figure 6A on Page 16, Figure 7A on

Page 17 and Plank Lengths Charts on Pages 18-19.) Install plank length A first, then install the

corresponding plank length B by butting plank B up against plank A. Make sure the planks are

supported by a grandstand on each side of the splice. Continue until floor is complete. Center and

install floor splice plate (CLF-1763) over the splice seam using self drilling screws. Use three (3)

screws at the end of the splice and two (2) for each plank, one on each side. (See Figure 2D.)

Figure 2D

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 41 42

No comments

Grain-systems Bin Flooring PNEG-222 User Manual Page 10