4. Installation
PNEG-1735 U-Trough Direct Gear Drive Bin Sweep Auger Unload Systems 25
Horizontal Drive Unit
1. Attach drive unit to unload.
2. Attach drive shaft and bearing.
3. Lock bearing to shaft with eccentric locking collar. The eccentric locking collar is locked to the shaft
with a punch and hammer (turn the collar clockwise to tighten) as well as with a locking set screw.
4. Note the flight rotation when installing and wiring the drive motor. Correct rotation is clockwise when
looking at the drive unit.
5. Adjust belt tension with clevis on overcenter tensioner.
Figure 4AF
Figure 4AG
Comments to this Manuals