Grain-systems Bin Flooring PNEG-1834 User Manual download pdf (Page 22)

5. Flooring - Planks

22 PNEG-1834 78' Dura-Lok Plank and Support Manual

Figure 5B Splice Assembly View

Flashing Installation

Figure 5C

Formed Flashing Installation

If bin sweep auger is to be used, overlap flashing such that rotation (usually clockwise) of the sweep will

climb up on the next flashing section. (See detail C in Figure 5C.) This will prevent the rotating/slipping

outer wheel of the sweep from catching on the flashing edges.

After the floor is in place, lay the flashing pieces on top of the floor place over the 1-1/4" bin bolts.

See Figure 5D and Figure 5E on Page 23 to determine the correct sequence for placing the nuts and

washers. Finger tighten the nuts. While holding flashing flat, fasten the flashing to the floor with sheet

metal screws. Now tighten flashing nuts.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 47 48

No comments

Grain-systems Bin Flooring PNEG-1834 User Manual Page 22